mastodon.radio is one of the many independent Mastodon servers you can use to participate in the fediverse.
Mastodon.Radio is a space for the Amateur (Ham) Radio community, anyone interested in Shortwave Listening (SWL), etc. Come join us and talk radio, technology, and more!

Administered by:

Server stats:

795
active users

I just checked out an end-fed antenna for portable low-power HF ham radio. It has no counterpoise, the instructions don't even talk about a counterpoise, and the designer warns that if you use a "ground grid" you may detune the antenna!

I looked at another brand, and it's the same. That one is sold by DX Engineering.

Electrically, there _must_ be a counterpoise. What is it with these antennas? It's the shield of your feed-line, your radio, everything connected to your radio, and you. ...

@BrucePerens_K6BP
Most use the coax feeding it, as apparently 0.05 wavelengths is optimal (according to some simulations I cannot make google find right now), so doing it with the coax feedline is easy.
The end-feds people build here in Finland all seem to include a ferrite choke in the feedline a slight distance from the antenna impedance transformer.

Bruce Perens K6BP

@ftg - This fellow has done a credible study: aa5tb.com/efha.html
and he has references at the end.

Apparently 0.05 wavelength is the length necessary to provide the correct impedance. I believe that their impedance is correct and their SWR is sufficiently low, but I bet the radiation resistance is horrible.

Like those small loop antennas that are really only 5% efficient, you can still work the world.

www.aa5tb.comAA5TB - The End Fed Half Wave AntennaThe End Fed Half Wave Antenna explained by AA5TB.

@BrucePerens_K6BP
Could be that.
And with the small loops the selectivity and ease of nulling out local interference also helps.